100 LED Solar Motion Sensor Light – IP65, 270° Outdoor
100 LED Solar Motion Sensor Light – IP65, 270° Outdoor
Illuminate Your Outdoors — Smarter, Greener, Brighter
Meet the ultimate solar-powered security and garden light. With 100 high-output SMD2835 LED bulbs, a wide 270° illumination angle, and built-in PIR motion detection, this solar spotlight keeps your pathways, garden, porch, and driveway brilliantly lit — all night, every night — with zero electricity costs. Made in Mainland China.
Key Features
- 100 LEDs for Maximum Brightness: 100 SMD2835 LED sources deliver a powerful, wide-area glow that outshines standard outdoor solar lights.
- 270° Wide Illumination Angle: Covers a sweeping arc for comprehensive coverage of driveways, patios, fences, and garden beds.
- PIR Motion Detection (120° / 6–8 m): Advanced passive infrared technology detects movement up to 6–8 metres away across a 120° sensing angle, triggering instant full brightness.
-
3 Intelligent Lighting Modes: Tailor the light to your exact needs:
- Medium Light Mode – Automatically switches on to steady, continuous brightness at dusk.
- Dim Light + Sensor Mode – Stays at a soft glow all night; bursts to full brightness for ~20 seconds when motion is detected.
- Sensor-Only Mode – Activates full brightness only when motion is detected, then turns off automatically — maximising battery life.
- IP65 Waterproof & Heatproof: Engineered to withstand rain, humidity, and extreme temperature swings — season after season.
- Easy, Tool-Free Installation: Mount with the included screws or simply hang — no wiring, no electrician needed.
- Eco-Friendly Solar Charging: Polysilicon solar panel (5.5V / 1.43W) charges the built-in 3.7V lithium battery in approximately 8 hours of direct sunlight.
Specifications
| LED Quantity | 100 × SMD2835 |
| Material | PC + ABS |
| Solar Panel | Polysilicon 5.5V / 1.43W |
| Battery | Lithium 3.7V (built-in) |
| Charging Time | ~8 hours full sun |
| PIR Sensing Angle | 120° |
| Sensing Distance | 6–8 metres |
| Illumination Angle | 270° |
| Waterproof Rating | IP65 |
| Product Dimensions | 13.5 × 9.7 × 5 cm |
| Certification | CCC |
| Country of Origin | Made in Mainland China |
Important Setup Notes
- Before first use, charge the light in direct sunlight for at least 12 hours.
- Install in a location that receives direct, unobstructed sunlight during the day for optimal performance.
- Charging speed and nightly run time depend on sunlight intensity — stronger sun = faster charge and longer light time.
Perfect For
Walls · Patios · Gardens · Porches · Lawns · Pathways · Driveways · Gutters · Fences · Decks
You May Also Like
- Stainless Steel Cord End Caps with Loop – 6pcs Jewelry Findings
- Stainless Steel Flat Disc Spacer Beads Gold Silver – 20–50pcs
Learn more: National Weather Service heat safety
Frequently Asked Questions
Q: How long does the 100 LED solar light stay on after a full day of charging?
A: Runtime depends on sunlight intensity during charging and which lighting mode is selected. In Sensor-Only Mode (most efficient), a full 8-hour charge in strong sunlight can provide several hours of triggered bright light. In continuous Medium Light Mode, runtime will be shorter. For best results, always ensure the solar panel receives direct, unshaded sunlight throughout the day.
Q: Is this solar motion sensor light truly waterproof?
A: Yes. The light carries an IP65 waterproof rating, meaning it is fully protected against dust ingress and low-pressure water jets from any direction. It is designed to withstand rain, splashing, and humid outdoor conditions across all seasons.
Q: Can I use this light in a shaded garden or covered porch?
A: The solar panel requires direct sunlight to charge effectively. If the panel is installed in a heavily shaded area, charging will be slow or may not occur at all. For best performance, mount the unit — or angle the panel — where it receives at least 6–8 hours of direct sun per day.
Q: How do I switch between the 3 lighting modes?
A: The light cycles through its modes via the built-in button. Press once for Medium Light Mode, press again for Dim Light + Sensor Mode, press a third time for Sensor-Only Mode, and a fourth press turns the light off. Always test the modes after the initial 12-hour charge.
Production & Packaging Notice
To maintain high stock availability and fast shipping times, our items are sourced from multiple verified manufacturing facilities. While the core quality, materials, and product specifications remain identical, you may notice slight variations in the packaging design, manufacturing origin, or the wording of the printed instructions.